Advanced-control-technologies RB104 (120/208VAC, 30A, SPDTA10 RELAY RECEIVER) Manual de usuario descargar pdf

0571-02

ADVANCED CONTROL TECHNOLOGIES, INC.

Indianapolis, Indiana 46278

RB104 Installation Instructions

P/D 012408

A10 120/208 VAC, 30A, Box Mount Receiver,

Standard and Extended Addressing

RB104

BEFORE YOU BEGIN...

READ ALL INSTRUCTIONS

Make sure your installation will conform to all applicable codes and requirements.

INSTALLATION

POWER CONNECTIONS:

1. Warning, shock hazard: To service the load, disconnect main power. Do not use the

manual ON/OFF override switch to disconnect load for service.

2. If single phase connection (120V) perform the following steps:

a) Connect the power supply neutral wire to the White wire marked “N” on the board.

b) Connect the line wire to the Black wire marked “L1” on the board.

c) Connect White wire “N” to Pink wire marked “PCC” on the board .

d) There should be no connection to the Red wire marked “L2” on the board.

3. If leg to leg connection (208V) perform the following steps:

a) Connect one line wire to the Black wire marked “L1” on the board.

b) Connect the second line wire to the Red wire marked “L2” on the board.

c) Connect Red wire “L2” to Pink wire marked “PCC” on the board.

d) There should be no connection to the White wire marked “N” on the board.

OUTPUT CONNECTIONS:

1. Connect the load to the GREY wire (normally open), or the BLUE wire (normally closed)

lead, and the VIOLET wire (common) lead.

2. See the "Relay Output" section in the specifications for maximum current and voltage

ratings.

EXTERNAL SWITCH:

1. Connect a switch to the removable terminal block P3. The switch may be any dry-contact

switch or relay. When the contact is closed the output relay will remain energized. When

the switch is opened the relay will default back to the last PCC command received.

1 2 3

OPERATION 2
CONFIGURING 2

Indice de contenidos

Pagina 1

0571-021ADVANCED CONTROL TECHNOLOGIES, INC.Indianapolis, Indiana 46278RB104 Installation InstructionsP/D 012408 A10 120/208 VAC, 30A, Box Mount Recei

Pagina 2 - CONFIGURING

0571-022RB104 Installation InstructionsP/D 012408ADVANCED CONTROL TECHNOLOGIES, INC.Indianapolis, Indiana 462782 The External Switch is only operat

Pagina 3

0571-023ADVANCED CONTROL TECHNOLOGIES, INC.Indianapolis, Indiana 46278RB104 Installation InstructionsP/D 012408Supply Voltage: 120/208 VAC, +/-10%,

Comentarios a estos manuales

Sin comentarios

Advanced-control-technologies RB104 (120/208VAC, 30A, SPDTA10 RELAY RECEIVER) Manual de usuario

Busca en linea o descarga Manual de usuario para Encendiendo Advanced-control-technologies RB104 (120/208VAC, 30A, SPDTA10 RELAY RECEIVER). Advanced Control Technologies RB104 (120/208VAC, 30A, SPDTA10 RELAY RECEIVER) User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Advanced-control-technologies RB104 (120/208VAC, 30A, SPDTA10 RELAY RECEIVER)